Kyle Rankin @kyle@librem.one

@Wildbill @katherined @jzb Looking forward to it!

@Wildbill So bye, bye, using free API
Made a checkmark cost 8 sawbucks, cuz ad revenue's dry
And them good ole bots were posting using AI
Singing this'll be the day that I die
This'll be the day that I die

Did you retweet posts you love
And do you have faith in Musk above
If the fanboys tell you so?
Now do you believe the election's stole?
Can free speech save your mortal soul?
And can you teach me how to troll real slow?

Halfway through tying a new warp onto the remnants of the old. Wow this is tedious work, and there is at least 3 more hours to go, but I still think it is faster and less error-prone than re-threading it.

#weaving #Fiberuary

@Kymberly I'm a beginner myself, but I would always opt for the finer reed if I had a choice. It would reduce abrasion as each warp thread would not be rubbing across any other warp thread (at least in the reed, possibly in heddles too) as you change sheds.

It would also better enforce the 16 EPI spacing when beating. With 8DPI reed, you would be putting more reliance on the fabric itself to maintain the even spacing between warp threads, I'd think.

@amanjeev @purism I apologize for the misunderstanding, I was not pinning anything on you, just making you aware that shipping you the phone immediately was still an option if you wanted it. In any case, we are doing our best to resolve our phone backlog and resolve cases such as yours as well. Please give support a bit more time to get back to you.

@amanjeev @purism They are doing the best they can. It's a shame you no longer want the phone, especially now that we are shipping them out en masse (so we could send yours immediately), but in any case, please give support a bit more time to get back to you and resolve your issue.

@amanjeev @purism That room is set invite only to address some past issues with spammers/trolls. Send Matrix ID and we can invite, however if you are looking for customer support, email is the route. Pinging me on my personal social media account is not the appropriate route.

@josh There are similar misconceptions about the Amish. It is just easier to dismiss avoidance of, and concerns about, negative consequences from some new technology by claiming it is all anti-technology.

@apples_and_pears Ahh I see. Yes I will definitely need to factor in the fact that the towels will shrink the first time they are washed and dried. It's just something I need to keep in mind when planning the dimensions for the towels.

@apples_and_pears In what sense?

@Triffen The first time I dressed the loom for the towel project, it took about 13 hours before I started weaving, not just due to the complicated and dense pattern, but from having to correct threading mistakes I discovered while sleying the reed. This skips the risk of threading errors.

I'm not fast at tying weaver's knots yet, but after 576 chances to practice, I bet I'll be pretty fast by the end!

I'm weaving a new set of towels using the same doubleweave overshot pattern as the last set, but this time using yellow and brown unmercerized cotton.

Because the pattern is the same, I can save time by tying my new warp onto the remnants of the old warp that are still threaded in the loom. You simply use a weaver's knot to tie each individual new warp thread to a corresponding old warp thread and then wind it back on. Only about 550 warp threads to go!

#weaving #Fiberuary

@kop316 All I recall is a lot of kneading and pulling, folding, kneading some more, repeat, in very hot water. Similar to windowpane kneading for bread (which I know you are familiar with), you have to get those protein strands to relax (very hot water) and then line up and twist together (kneading and pulling).

@kop316 We only did it once. It requires a *lot* of heat (to the point that you need to wear those thick rubber gloves), and lots of kneading and pulling.

Now that the knitting machine is mounted on the board, you can really see how much space it would take up on the wall. We thought it over and decided to replace the large 48-hook version with the smaller 22-hook version.

Fortunately everything I did to the machine is reversible, and I still have the box and all the accessories. I know someone who I think will really like this one as a gift so it won't go to waste.

@KekunPlazas Congratulations!

@wobin It has 48 hooks, and will do a stitch every half hour, one round every day. The current plan is to knit a 365-round scarf for 2023. I will "cheat" and catch it up to the current day (whenever that is) when I get it done, and then have it take things from there.

I plan on marking significant days in the year with a colored thread. For instance, if I get this done by Valentine's Day, I will mark that with a red thread.