Sebastian Krzyszkowiak @dos@librem.one

@jawsh If you create an appropriate calibration profile and preset, then sure - though you'll likely also need quite a bit of patience when running it on the PinePhone ;)

@pocketvj It's using darktable-cli to develop the raw files with a better (but slower) pipeline than what Millipixels does by default (which is fast, but very basic). Never used gmic.

A few more glowup examples 😼

#shotonlibrem5

@cocolinofan It's better than nothing, but definitely not something that should go into Lensfun database. It needs proper calibration samples, the ones I took so far suck in a way or another.

@janvlug It appears that he's moving in, but still needs to work on gaining approval of other tenants 😺

It just uses a single preset and doesn't let you adjust anything, but it's a start - some photos already glow up a lot with it. The obvious next step would be adjusting parameters in the XMP file; not a rocket science, darktable does everything for us already.

It probably needs to be fully rewritten before adding stuff, but it's just 400 lines of hardcoded UI code in Python, so that could be someone's one-afternoon project 😜

Seems like nobody was reaching for this low-hanging fruit, so I did it myself:

"Glowup" is a quickly hacked up thing that lets you glow your Librem 5 photos up with one click right on the phone, using #darktable and about 30 seconds of processing.

https://gitlab.com/dos1/glowup

#librem5 #mobilelinux #linuxmobile #linuxsmartphones #shotonlibrem5 #catsofmastodon (late)#caturday #myfirstlibadwaitaapp 😜

@davidho Just like Y2K. So much fuss and yet nothing happened!!! 🙈

@jwildeboer To me they passed that point around 15 years ago 😛

@chrisphin @elliotjaystocks @glennf I remember subpixel fonts being used on Ben NanoNote to fit more text in the console, but those didn't go as far as being 1 pixel wide 😀

@malwaretech That "dragging off the stage" was probably the only thing handled perfectly right in this whole situation. The guy had no intention to leave the stage on his own, but had no intention to physically fight either. He got to make his point, security got to ensure he wasn't on stage as instructed by organizers; all while both sides clearly had some fun in the process 😂

@Sophie 🐸

@martijnbraam I considered that, but eventually decided against:
a) CH342 has an integrated LDO; BOM wouldn't get shorter by getting rid of it
b) this way UART channel works regardless of what you're doing in firmware; one less thing to care about
c) there are free samples available for STM32G071CBT6; no samples for USB-equipped G0B1/G0C1 😄

@ge0rg It's somewhat common in DIY designs, badges etc. although those usually don't require any PD stuff. MacBooks can expose 1.2V UART, I2C and debug USB - you could use Debubo paired with SBUB to access that. And who knows what undocumented commands to mux things onto SBU may be in other devices out there 😁

@eliasr Nope; with Debubo (and a right TPS65982 config) you can access UART console, while also connecting a charger or some USB thingy, either host or device.

But what you described is pretty much just a regular USB-C hub with PD 😁

The hardware design is now released at https://gitlab.com/dos1/debubo

#debubo #kicad #diy #electronics #librem5 #stm32 #usbpd #oshw

@forteller Thanks for sharing! I was looking for a GTK4 app just like that to steal its UI from 😈