João Azevedo @joao@librem.one

teste

@werdahias

was it something similar to this?

https://drewdevault.com/2019/12/30/dotfiles.html

@DiogoConstantino

Ah! so that was it.

@brunomiguel @per_sonne

@DiogoConstantino @brunomiguel @per_sonne but was the LTS not postponed for some reason?

@werdahias ohh wow! Thanks for this work!

I want to use obfuscate as a deb package.

@rmader

As for the firmware, if you are on pureos, then you can check the u-boot version, by going into the mobile settings app in the app tray, then: Librem 5

If you are not on pureos you can also likely get the version with dmesg:

sudo dmesg | grep u_boot_version

To check the firmware version of the USB PD controller you can also use:

sudo cat /sys/kernel/debug/tps6598x/0-003f/customer_use

@agx

@rmader

The end of the output shows:

POWER_SUPPLY_USB_TYPE=C [PD]
POWER_SUPPLY_ONLINE=1
POWER_SUPPLY_PRESENT=1
POWER_SUPPLY_CURRENT_MAX=3000000
POWER_SUPPLY_VOLTAGE_MAX=5000000

then it is charging at 5v and 3A and doing PD

@agx

@rmader

Well, if it booted, then you can now connect it to the Librem 5 official charger and it should do power delivery negotiations and charge at more than 5v/0.5A

It might be that you need a couple of charge/discharge cycles for the battery to be ok.

There are other ways to do this, but you can check if it doing PD, with this command (at least in PureOS):

tail -n+0 /sys/class/power_supply/*/uevent

@agx

@rmader @agx

If you get it to boot we can check on the firmware :)

@rmader @agx and yes, that is a Evergreen device battery.