Dear #Librem5 Community,

i broke the Screen of my Librem5 which i have been daliy driving since 8 Month now. So i will order a #replacement screen from #purism ( which cost 150$, if anybody is also interested).

Did anybody already replaced the screen or knows any source with information how to do it?
the "disassemble video" from purism does not go that far: youtu.be/NWQW9bmwHBo

Thanks in advance for any tip and #help 🙂️

@MissBehave
Depending on when you have bought it, it could still be under guarantee.

May be best if you get in touch with them first if you haven't already
@linmob

@Shredd_Tone @linmob yes, thx. i asked if the repair would be under guarantee, lets see what they answer!

@Shredd_Tone @linmob so, support answered, that accidental damage is not covered by warranty. so i ordered the replacement stuff. maybe i can take some pictures during the process to make replacement easier for others🙂️ (if i sucede;))

@MissBehave
I'm sorry to hear that your warranty isn't covered, but I would be very interested in seeing that process.

It would be very beneficial to everyone else
@linmob

@Shredd_Tone @linmob

So, i finally tried out changing the screen. In total (also the journey is not completley finish), i would say it was an interesting adventure, however in the end i failed to a high degree😅

Here is what happened:

1) @purism sended me a whole new frame (see picture, the lower frame is the new one). That means, you do not dissolve the screen and clue a new one to it. Instead you take the innards out of your old phone/frame and operate them into your new one.

@Shredd_Tone @linmob @purism

2) For doing that, the Purism Video about Dissassembling the #Librem5 is very helpful. However, the video stops after taking out the Main PCB. For completely switching, you still need to take out the lower part of the phone, where lower microphone is positioned and where the charger docks (see picture, red circle). For that part, you are on your own without video assistance. It would be nice if Purism could put up a complete video of disassembling. #linux

@Shredd_Tone @linmob @purism

3) So the first thing you have to do is take of the black cover on the lower end, so that you see the green board (see picture1, red circle). Than you take out the board. So far, it is only a few screws.

3) Then you have to take of the black "badge" which is clued on the ground of the phone (see picture2, red circle). You can peel that of with your hand. But attention! You need it for your new frame, since there is no badge delivered with it.

#linux #librem5

@Shredd_Tone @linmob @purism

4) In the last step, you need to take out the cooper (?) cable (see picture, red circle). It is also clued to the ground but you can peel it of carefully.

5) Then your done disassembling and can start reassembling the new frame💪

However, during disassembly three mistakes happened to me:

1) The GPS-Module broke of😬 In the video it is stated that you have to be very careful an, well, i can confirm that. Disassembling went well, reassembling did not...

@Shredd_Tone @linmob @purism

2) Somehow i put one of the cables for the WLAN-Module not completely correct back in - at least in the end, when everythin was reassembled, it was not long enough to be connected to the module. That means: Everything has to be taken out again to the level of the cables🤨

#linuxmobile
#librem5

3) And the biggest problem: I could turn the phone with its new screen back on in the end - also momentarily without GPS and WLAN - but: It is not charging! Somewhere done in the inner guts of the phone something must have went wrong...maybe i connected something not correct, maybe i damaged the cooper cable while peeling it of🤷‍♂️

Result:
I will trying to fix those thing (soldering the GPS, buying a new cable and look if i find something for the charging-problem).

#linuxmobile #linux
#librem5

However, i do not bet on me getting it full functional again. So, unless your a pro or very confident in assembling phones, it might be the more secure way to send your phone in an let #purism do the screen-change.

Wishes:
It might be helpful, if a more detailed (dis)assembling video is put online: How do you exactly take the main PCB out (and back in) without breaking the GPS? How do put the cables exactly?

#linuxmobile #librem5

And of course: Show the whole disassembling, including the lower board and the cooper cables. And do you need special clue for the later one?...etc...etc.

Nevertheless, it was fun and i learned a lot during the process (never did something like this before). And luckily i have a second functioning(!) #Librem5 which i can use as my daily driver😅

I hope the #Linuxphone world keeps expanding so that one day "normal" repair shops can do that stuff for you;)

#linuxmobile

Follow

@MissBehave Thanks a lot! Very interesting to read!

If you could put that on the community wiki to help others?

@chrichri

Hi, thx. i am not active on the forum, however feel free to use every information you think is helpful!:)

Sign in to participate in the conversation
Librem Social

Librem Social is an opt-in public network. Messages are shared under Creative Commons BY-SA 4.0 license terms. Policy.

Stay safe. Please abide by our code of conduct.

(Source code)

image/svg+xml Librem Chat image/svg+xml