This is a pair of Addometers made by Reliable Typewriter & Adding Machine company. They were made from 1930-1960s. The top one is a Model A I think from the early 1930s due to "patent pending" text on the front. The bottom one is a Model C I think from the 1950s.

From a distance they look similar but the Model C was designed for adding Imperial measurements and has a dial that goes up to 11 for adding inches. Both models feature a dial for fractions on the far right, where Model Bs only have decimal dials. All models have a ruler on top.

My Model A came with the original case, which was designed with a notch cut in the side so you can access the stylus storage and the clearing lever without removing it from the case. It also came with the original instructions!

Show thread

To add, put the stylus in the dial for the corresponding digit using the larger numbers, and turn clockwise until the dial stops. The mechanism automatically carries the one without having to move in different directions like with a "shepherd's hook" design. Here is 31337 + 4.

Show thread

To subtract, use the smaller digits on the outside of the dial to enter the subtrahend and rotate anti-clockwise. The mechanism also will decrement from the left side automatically. Here I'm subtracting 50 from 31341.

Show thread

To multiply, perform repeated addition and shift left for each term in the multiplier. Here is 12 x 12.

Show thread

You can also perform division using the repeated subtraction method but you have to keep track of the number of subtractions in your head. To clear the registers, just pull on the lever on the right side. This also ejects the stylus for you if it's in storage.

Show thread

As I mentioned the Model C was designed for Imperial measurements and had a dial that went up to 11 so inches could carry over into feet. Here I'm calculating 2' 9 3/4" + 1' 6 7/8". Doing math with Imperial measurements really makes you appreciate the Metric system.

Show thread

Due to the size and the case design, I suspect Addometers were mostly stored on or in desks and pulled out for quick arithmetic and they work well for that. The Imperial model I have was probably thrown in a toolbox and has lots of wear and even initials carved in it.

Show thread
Sign in to participate in the conversation
Librem Social

Librem Social is an opt-in public network. Messages are shared under Creative Commons BY-SA 4.0 license terms. Policy.

Stay safe. Please abide by our code of conduct.

(Source code)

image/svg+xml Librem Chat image/svg+xml